Journal
Scientific and Technical Journal of Information Technologies, Mechanics and Optics
UDK621.763
Issue:1 (147)
Download PDF0 Kbyte
Investigation on impact and wear behavior of Al6061 (SiC+Al2O3) and Al7075 (SiC+Al2O3) hybrid composites
Annotation
The current study focuses on the properties of dry sliding characteristics and impact strength of two different aluminum alloys that were reinforced with 100 nm sized Silicon carbide (SiC) and Aluminum oxide (Al2O3) ceramic particles, for improving the mechanical properties of the final alloy with the mixing materials characteristics. Stir casting method is adopted for fabricating the composites, matrix being Al6061 and Al7075, utilizing three distinct reinforcement ratios. In order to improve the mechanical properties and increase resistance to wear, tear, and shear, SiC and Al2O3 are utilized as reinforcing elements. Following the creation of the composite matrices, their physical and mechanical behaviors are examined in accordance with ASTM standards, and a comparison between the hybrid composites made of Al6061 and Al7075 is then completed. Comparison of the obtained samples showed that the Al7075 (12 % SiC + 6 % Al2O3) alloy exhibits characteristics with exceptional tribological and mechanical characteristics. The studied alloy can be used in the automotive industry, for example, in the production of pistons, connecting rods, due to the minimum degree of wear and variable thermal expansion coefficient.
Keywords
Постоянный URL
Articles in current issue
- Characterization of the holographic photopolymer Bayfol HX in the IR region
- Study of blood vessels reaction to local heating by imaging photoplethysmography
- Transmission of 3D holographic information over a radio channel by a method close to SSB
- Anodization parameters influence on anodic aluminum oxide formed above the silver island film
- State estimation accuracy analysis of an induction electric drive by the algorithms of Luenberger and Kalman
- A method of optimizing the structure of hierarchical distributed control systems
- Method for identification of sinusoidal signal parameters with variable unknown amplitude
- Improvement of the automatic temperature stabilisation process in the cryovacuum unit
- Computational methods to increase the speed of FPGA-based discrete wavelet transforms
- .Dialogue system based on spoken conversations with access to an unstructured knowledge base
- Multiobjective evolutionary discovery of equation-based analytical models for dynamical systems
- Probabilistic criteria for time-series predictability estimation
- Software framework for hyperparameters optimization of models with additive regularization
- Value-based modeling of economic decision making in conditions of unsteady environment
- Methodology for organizing and conducting a study to assess consumer ability
- Automated cluster analysis of communication strategies of educational telegram channels
- Computer modeling of non-Markovianprocesses based on the principle of balance of “complex probabilities”
- The objectification method of the weight coefficients for decision-making in multicriteria problems
- Grishentsev A.Yu., Goroshkov V.A., Chernov R.I.Assessment of the limits of applicability and methods of modulation of near-field magnetic coupling
- Numerical and analytical modeling of the propulsive wing and fuselage of an air taxi
- Using variable-precision feedback to improve operational speed of the current loop in GaN-inverters
- Simulation of diffusion processes during electrothermal treatment of reaction crucibles of the Fe-Sn system